Mostrar el registro sencillo del ítem

dc.contributor.authorWang, Han-Lin
dc.contributor.authorCui, Yu-Jun
dc.contributor.authorLamas López, Francisco
dc.contributor.authorCalon, Nicolas
dc.contributor.authorSaussine, Gilles
dc.contributor.authorDupla, Jean-Claude
dc.contributor.authorCanou, Jean
dc.contributor.authorAimedieu, Patrick
dc.contributor.authorChen, Ren-Peng
dc.date.accessioned2024-02-06T12:54:37Z
dc.date.available2024-02-06T12:54:37Z
dc.date.issued2018-01-03
dc.identifier.citationWang, H. L., Cui, Y. J., Lamas-Lopez, F., Calon, N., Saussine, G., Dupla, J. C., Canou, J., Aimedieu, P., & Chen, R. P. (2018). Investigation on the mechanical behavior of track-bed materials at various contents of coarse grains. Construction and Building Materials, 164, 228-237. https://doi.org/10.1016/j.conbuildmat.2017.12.209es
dc.identifier.issn09500618
dc.identifier.urihttp://hdl.handle.net/20.500.12020/1268
dc.description.abstractIn the conventional French railway substructures, a layer namely interlayer was created naturally by the interpenetration of ballast and subgrade. The lower part of this interlayer is characterized by a matrix of fines with inclusion of coarse grains in it. Moreover, the coarse-grain content is decreasing over depth. In this study, the effect of volumetric content of coarse grains fv (volumetric ratio of coarse grains to the whole sample; grain size > 2 mm) on the mechanical behavior of the lower part interlayer soil was investigated by carrying out monotonic triaxial tests. The results showed that increasing the volumetric content of coarse grains fv led to more significant dilatancy. The shear strength also increased with the increase of fv and the increasing trend appeared to be much more significant when fv >20%. Examination of the variations of peak deviator stress with fv revealed the existence of a characteristic value of fv-cha ≈ 27% that separates two zones with different coarse-grain effects: a fine-fine contact dominating zone when fv ≤ 27% and a grain-grain contact dominating zone when fv > 27%. To clarify the observed phenomena, X-ray microcomputed tomography (μCT) scans were performed on the as-compacted samples, allowing the coarse-grain distribution inside the as-compacted sample to be visualized. It was found that when fv ranged from 0% to 10%, the skeleton of the sample was mainly constituted by fines with the coarse grains floating in the fines matrix. By contrast, when fv reached 20%, the coarse grains formed some aggregates but the fine-fine contacts were still dominating. When fv increased up to 35%–45%, the skeleton of the sample turned to be dominated by the coarse grains. This suggests that the characteristic volumetric content of coarse grains identified through monotonic triaxial test results corresponds to the transition of soil fabric from fine-fine contacts to grain-grain contacts.es
dc.description.sponsorshipANRTes
dc.description.sponsorshipSNCFes
dc.language.isoenes
dc.publisherElsevieres
dc.titleInvestigation on the mechanical behavior of track-bed materials at various contents of coarse grainses
dc.typearticlees
dc.identifier.doihttps://doi.org/10.1016/j.conbuildmat.2017.12.209
dc.journal.titleConstruction and Building Materialses
dc.page.initial228es
dc.page.final237es
dc.relation.projectIDANRT/CIFRE/INVICSA/2012/1150es
dc.rights.accessRightsopenAccesses
dc.subject.areaCiencias de la Naturalezaes
dc.subject.areaIngenieríases
dc.subject.areaMatemáticas y Físicaes
dc.subject.keywordConventional track-bedes
dc.subject.keywordInterlayer soiles
dc.subject.keywordMonotonic triaxial testses
dc.subject.keywordX-ray microcomputed tomography (μCT) scanses
dc.subject.keywordCharacteristic volumetric content of coarse grainses
dc.subject.unesco3323 Tecnología de Los Ferrocarrileses
dc.subject.unesco2505.04 Utilización del Terrenoes
dc.subject.unesco1209.03 Análisis de Datoses
dc.volume.number164es


Ficheros en el ítem

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem